Simco-ION R50 Blue Bar

Call for Price

Product Description

A super high-output static bar which can be mounted up to 6″ away from the target material and which can handle web speeds up to 2500 feet per minute and more. The R50 has a high voltage cable which is permanently attached to the static bar.

BlueBarSimco-ION R50 Blue Bar

NEW:  Warranty Extended to 30 Months Now Available Moisture ResistantThe Blue Bar is a super high-output, rugged, shockless static bar which can be used in almost any application requiring a static bar. The bar is especially useful for high speed applications and is effective at web speeds of 2500′ per minute or more. The bar delivers long range static elimination, and can be located up to 6″ (and sometimes more!) from the target material.

The patented Blue Bar is designed for easy cleaning and offers a mounting channel with full length adjustment. The bar’s high voltage cable is metal shielded, which controls EMI and RFI emissions, eliminating interference with external controls and circuitry.

The Blue Bar can be powered by the NEW TrueAC Self Monitoring Power Supply  or D167Q/D257Q Power Supply, which must be ordered separately. The TrueAC Power Supply gives you Bar ON Indicator, Bar OFF Indicator, CLEAN BAR Indicator, FAULT Indicator with arc detection circuit protection for the transformer, SERVICE Indicator, BAR PERFORMANCE Display, and Remote Display capabilities.

The R50 BlueBar can be made “ moisture resistant” not waterproof.  The bar cannot be immersed in water or subjected to constant wash down.  However, it will withstand occasional contact with water, such as splashing or an infrequent wash down when an operator forgets to remove the bar from the wash down area.  It will also function in high humidity environments.

Prototypes ran continuously (24/7) for over eight months in a 100% humidity environment before burnout.  This is equivalent to almost three years of operation 8 hours per day, 5 days per week.
FAQ     Static Bar Comparison Chart     Dimensional Drawing(25kB)

DOWNLOAD: R50 Blue Bar Datasheet Rev K

DOWNLOAD: R50 Blue Bar and Power Supplies Installation and Operating Instructions 5101171 Rev L

Specification:

Shockless or Hot Shockless
Ionization Output Very High
Maximum speed of target material 2500 fpm and more
How far from charged material can bar be mounted? up to 6 inches
Approved for hazardous locations No
Intended for heavy, normal or light industrial applications Any
Maximum overall length 156 3/4 inches

 

Design Your R50 Blue BarIt’s easy to configure and order a Simco R50 BlueBar static bar to fit your requirements. They are available in 0.59” increments starting with overall lengths from  3.34” with a single ionizing emitter pin up to 156.30” with 152.95” of ionizing emitter pins.  All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach the cable to a SIMCO Power Supply.  Standard high voltage cable length is 7-ft.  Lengths of 14-ft and 21-ft can be made if required.  We can also add a right angle cable exit to facilitate cable routing.

Simply select the overall length of the static bar you need, determine if additional cable length is required to reach the power supply mounting location, and if a right angle cable exit is desirable.   Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get one built for you!

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.

You must order a power supply to power the static bar if you do not already have one.  We recommend the following models for the R50 Static Bar:

 

Power Supply Part Number
TrueAC – 120V, 50/60 Hz, 7 kV, 2 output IPTAC17
TrueAC – 120V, 50/60 Hz, 7 kV, 4 output I4010604
TrueAC – 230V, 50/60 Hz, 7 kV, 2 output IPTAC27
TrueAC – 230V, 50/60 Hz, 7 kV, 4 output I4010605
D167Q – 120V, 60 Hz, 7 kV, 3mA max, 2 output IPD0200
TrueAC – 120V, 50/60 Hz, 5 kV, 2 output, used with Moisture Resistant R50 Bars and R55 Nozzles IPTAC15
TrueAC – 120V, 50/60 Hz, 5 kV, 4 output, used with Moisture Resistant R50 Bars and R55 Nozzles I4010883
TrueAC – 230V, 50/60 Hz, 5 kV, 2 output, used with Moisture Resistant R50 Bars and R55 Nozzles IPTAC25
TrueAC – 230V, 50/60 Hz, 5 kV, 4 output, used with Moisture Resistant R50 Bars and R55 Nozzles I4010884

 

Category: