Simco-ION PSH-N Static Bars

Call for Price

Product Description

High output, very rigid bar with two parallel rows of pins. The bar’s extended range allows it to be mounted up to 6″ from the target material.

PSH-N Static Eliminating BarsSimco-ION PSH-N Static  Bars

The PSH-N is a high output, shockless static bar  with two parallel rows of pins. The static bar offers maximum strength,  rigidity, and ruggedness. The sag rate of the PSH-N is less than 1/2″ inches  over 10 feet of bar length.

The PSH-N is popular for a wide variety of  applications, and is particularly preferred for long distance applications, such  as on bag machine wicketers, since the bar can be mounted up to 6″ from the  target material.

FAQ     Static  Bar Comparison Chart     Dimensional Drawing(40kB)

Specification:

Shockless  or Hot Shockless
Ionization Output High
Maximum speed of target material 1,500 feet per minute
How far from charged material can bar be mounted? up to 6 inches
Approved for hazardous locations No
Intended for heavy, normal or light industrial  applications Any
Maximum overall length 149 3/8 inches

 

Design Your PSH-N Static Bars

It’s easy to configure and order a Simco PSH-N static bar to fit your requirements. They are available in 3/4” increments starting with  overall lengths from  5.18” with a single pair of ionizing emitter pins up to 149.18” with 144” of ionizing emitter pin pairs.  All  SIMCO static bars are shipped with mounting brackets, high voltage cable and a  connecter to attach the cable to a SIMCO Power Supply.  Standard high voltage cable length is 10-ft.  Longer lengths can be made if required.

Simply select the overall length of the static bar you need and determine if additional cable length is required to reach the power supply mounting location.    Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll have one built for you!

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.

You must order a power supply to power the static bar if you  do not already have one.

We recommend the following models for the PSH-N Static  Bars.

Power Supply Part Number
F167 – 120V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0300
F167S – 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S0
F267 – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0301
F267S – 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S1
N167 – 120V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0519
N267 – 230V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0515
N257 – 230V, 50Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0516

Category: