Simco-ION MEJ Static Bar

Call for Price

Product Description

Aluminum encased, small profile round static bar. Machinery often comes with this bar pre-installed because it fits into tight spaces.

MEJ Static Eliminating BarSimco-ION MEJ Static Bar

The MEJ small, circular size allows it to easily fit in tight spaces. The MEJ is a very efficient and versatile static bar which is used in a wide variety of applications in many industries.

UL, CSA and FM approved.

FAQ

Static Bar Comparison Chart

Dimensional Drawing(74kB)

Specification:

Shockless or Hot Shockless
Ionization Output Standard
Maximum speed of target material 1200 ft/min
How far from charged material can bar be mounted? 1 inch
Approved for hazardous locations No
Intended for heavy, normal or light industrial applications Normal
Maximum overall length 143 1/2 inches

 

Design Your MEJ Static Bar

It’s easy to configure and order a Simco MEJ static bar to fit your requirements. They are available in in 3/4” increments starting with overall lengths from  2.5” with a single ionizing emitter pin up to 140.5” with 138” of ionizing emitter pins.  All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach the cable to a SIMCO Power Supply.  Standard high voltage cable length is 10-ft.  Longer lengths can be made if required.  Corona-free shielded cable is also available for EMI/RFI protection.  We can also add a right angle cable exit to the bar to facilitate the cable run.

Simply select the overall length of the static bar you need, determine if additional cable length is required to reach the power supply mounting location, whether EMI/RFI protection is desirable, and decide if the right angle cable exit is wanted.    Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get on built for you!

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.

You must order a power supply to power the static bar if you do not already have one. We recommend the following models for the MEJ Static Bar.

Power Supply Part Number
F167 – 120V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0300
F167S – 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S0
F267 – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0301
F267S – 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S1
N167 – 120V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0519
N267 – 230V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0515
N257 – 230V, 50Hz, 7 kV, 3mA max, 4 output, lighted power switch IPN0516
D167Q – 120V, 60 Hz, 7 kV, 3mA max, 2 output, use with Corona-free Shielded Cable IPD0200

Category:

You may also like…