Product Description
New Technology! The IQ Power LPS is designed to efficiently neutralize electrostatic charges on films, paper, non-wovens and fabric in web or sheet form. Due to its high output and range, the IQ Power is also ideal for applications such as blow molding and injection molding.
IQ Power LPS Static Neutralizing System
IQ Power Static Bars
The static neutralizing bar features current limiting at each individual ion emitting pin to minimize the risk of hazardous electrical shock if the bar is touched while in operation. This safety feature does not compromise the IQ Power system’s ability to neutralize static charges. The emitter pins are made of a special alloy to extend the longevity and sharpness of the points, providing optimal performance of the static bar.
IQ Power LPS Module
The high voltage power supply module provides microprocessor controlled high voltage DC output to the static bar. The high voltage causes the ionizing pins on the static bar to generate positive and negative ions. The electric field from the static charge on the material being processed will attract opposite polarity ions from the static bar causing the material to be neutralized. Patent pending one-push calibration simplifies set-up.
The IQ Power static bar is tailored to the application. Speed bars are optimized to operate on high speed webs at distances of 50 to 230 millimeters [2 to 9 inches]. The IQ Power static bar has a plug-in style high voltage connector for fast and easy installation.
IQ Power Splitter Box
The Splitter Box offers the opportunity to maximize the potential of the IQ Power system, providing the capability to operate up to four bars on the same Limited Power Supply. The addition of the Splitter Box not only enables you to add more bars to the power supply but will also allow you to deal with those difficult applications where cable length or load restrictions are a problem.
IQ Power LPS
- Patent pending one-push calibration simplifies set-up
- Indicators on power supply display status of neutralizing system, power, service required and detection of system faults.
- Relay contact output “echoes” indicators on power supply for remote sensing and alarm
- Emitter points are current limited to enhance operator safety
- Emitter points composed of special alloy to extend operating life
- Mounting bracket makes for easy and flexible installation
Specifications: |
IQ Power Bar | |
Shockless or Hot | Shockless |
Nominal Bar Length | 301mm to 3961mm (11.8” to 156”) Overall Length |
Profile Dimensions | 24mmW x 38mmH (0.94” x 1.5”) |
Weight | 1.2gm / mm (0.07lbs / in.) |
Max. Operating Temp. | 80C (176F) |
Maximum Humidity | 80%RH, no dewing permissible |
Housing | Glass-fibre reinforced polyester |
High Voltage Conduit | Flexible nylon tubing, black |
Emitter Material | Proprietary alloy specially selected to extend pin life |
Emitter Spacing | Speed Bar, 30mm (1.18”) |
Operating Distances | Speed, 50 – 230mm (2 – 9”) |
Installation Hardware | Plastic mounting brackets, metal perforated strips and ss hardware |
IQ Power LPS (Limited Power Supply) | |
Input Power | 24VDC, 1.6A from AC Adapter |
Output Voltage | Speed Bar, +/- 7kV |
Dimensions | 202L x 123W x 106mmH (7.95 x 4.84 x 4.17”) |
Weight | 1.89 kg (4.17 lbs) |
Max. Operating Temp. | 43C (110F) |
Housing | Steel, black epoxy powder coated |
HV Connectors | 2 proprietary IQ Power static bar outlets |
Design Your IQ Power LPS Static Neutralizing System
It’s easy to configure and order a IQ Power LPS static bar system to fit your requirements. Simply select the overall length of the static bar you need (either to match your widest web’s width or a convenient width to facilitate mounting), and the length of high voltage cable you need ( 10 feet is standard and included with the bar). A splitter box can be added should you have needs to connect more than 2 bars to an LPS Power Supply. A maximum of two splitter can be used for a total of four bars powered by one LPS Supply
Questions? E-mail us or call CC Steven at 805-658-0207.