The body of the 8001KDT is made of a fiber-reinforced polyester resin for extra rigidity.
8001KDT Static Bar – **DISCONTINUED call for tech help!
The economical, rugged design of the 8001KDT neutralizing bar is ideally suited for single bar applications, installations where space requirements are tight and when machines are best accommodated with multiple bars connected through a Universal Virtual AC power strip. The body of the 8001KDT neutralizing bar is made of a fiber-reinforced polyester resin for extra rigidity. Ionizing electrodes in the 8001KDT are spaced 1” apart and converge into a single row from each side of the bar.
|Shockless or Hot||Shockless|
|Housing Material||Fiberglass reinforced polyester|
|Emitter Pin Material||Tungsten|
|Emitter Pin Spacing||1 inch|
|Approved for hazardous locations||No|
|Maximum overall length||139 inches|
Design Your 8001KDT Static Bar
It’s easy to configure and order a Simco 8001KDT static bar to fit your requirements. They are available in 2” increments starting with overall lengths from 8.4” up to 142.4”. All 8001KDT static bars are shipped with mounting brackets. High voltage cable and Power Supplies are sold separately.
Simply select the overall length of the static bar you need and determine what cable length is required to reach the power supply mounting location. Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get on built for you!
You must order a power supply to power the static bar if you do not already have one. We recommend the following models for the 8001KDT Static Bar.
|Power Supply||Part Number|
|8100 Power Module||91-8100P|
|8015 Power Supply||91-8015|