HL Power Unit for perforMAX IQ HL

Call for Price

Product Description

Used with perforMAX IQ HL Bas in Class I, Division 1 and 2, Group D hazardous areas. Must be mounted outside hazardous areas.

HL-Power-supplyPerforMAX IQ HL Power Unit

The PerforMAX IQ HL Power Unit, mounted outside the hazardous area, enables the user to be in charge of static electricity in hazardous locations. Along with the perforMAX IQ HL Static Bar, it is designed to efficiently neutralize electrostatic charges on films, paper, non-wovens and fabric in web or sheet form, making it the perfect solution for solvent coating and rotogravure processes.

The PerforMAX IQ system ensures complete static control by providing constant self-diagnosis information along with optional continuous downstream monitoring of the static charges on the web. The web monitoring module uses closed-loop feedback to fine tune the performance of the system. The web monitor also provides local and remote downstream web charge indication along with programmable alarm setpoint features for activating a remote alarm or triggering a PLC to shut down the process should a problem arise.

The PerforMAX IQ HL system is also designed to incorporate an optional communication module to provide an interface link from the IQ system to a PLC or computer master, with software or a number of common fieldbus network configurations such as Profibus, DeviceNet, EtherNet or Modbus as examples.

PerforMAX IQ HL Power Supply

The HL Power Supply processes all of the system intelligence to maintain and communicate complete static control for mounting outside the hazardous location.

• Proprietary push-button calibration

• Ionization output monitor for viewing system performance

• Proprietary high voltage connector system

• LED indicators for power, clean bar, fault, and web sensor identification


PerforMAX IQ BPS (Basic Power Supply)
Input Power 24VDC, 1.5A from AC Adapterr
Output Voltage Speed Bar, +/- 7kV,  Hybrid Bar, +/- 9kV, Distance Bar, +/- 12kV
Dimensions 202L x 123W x 106mmH (7.95 x 4.84 x 4.17”)
Weight 1.94 kg (4.28 lbs)
Max. Operating Temp. 43C (176F)
Housing Aluminum, black epoxy powder coated
HV Connectors 2 proprietary PerforMAX IQ static bar outlets


PerforMAX_IQ_Web MonitorPerforMAX IQ Web Monitor

The optional remote mounted PerforMAX IQ Web Monitor Module is a unique opportunity to install a closed-loop, total control, ionization system in a production environment. The downstream charge recognition enables the IQ to maintain maximum performance, and also display that performance to the end-user.   The web monitor is capable of powering up to 4 sensor probes on each module, and has programming capabilities that allow the sensors to be mounted at 1”, 2” or 3” from the surface.  The web monitor also has a programmable alarm feature that allows the operator to set the alarm threshold for each individual probe, which will then activate the alarm signal should the static charge level on the material exceed the alarm set-point. This truly innovative feature puts the operator in control of static electricity.


Web Monitor Module
Input Power 24VDC, 0.25A from PerforMAX IQ (BPS) System
Probe Quantity Total 4 probes maximum
Dimensions 202 L x 123 W x 106 H (mm), 7.95 x 4.84 x 4.17 (in)
Weight 1.12 kg  (2.48 lbs)
Max Operating Temp 43C (176F)
Housing Aluminum, black epoxy powder coated
Sensor Probe
Operating Distance 25mm (1”), 50mm (2”), 75mm (3”) firmware selectable
Installation Location Downstream of IQ Static Bar
Input Power from PerforMAX IQ Web Monitor
Purge Connection 1/4” tube quick connect
Purge Flow 20.85m3/h (0.5cfm) to 5.0m3h (3.0cfm), (1psi max) clean, dry air
Dimensions 110 L x 35 W x 37 H (mm), 4.33 x 1.38 x 1.46 (in)
Weight 0.22 kg  (0.48 lbs)
Max Operating Temp 43C (176F)
Housing Aluminum and stainless steel
Communication Cable Length 50-ft, can be cut to length during installation


PerforMAX_IQ_Comm ModulePerforMAX IQ Communications Module

The optional remote mounted PerforMAX IQCommunication Module creates a computer link between the IQ system and a PLC or computer master, to provide a convenient summary of performance and system alarm data for those users that require a historical record for lot control or customer review if requested. The module can be configured to utilize system supplied software or a number of fieldbus communication protocols such as Profibus, DeviceNet or Modbus as examples.


Input Power 24VDC, 1.0A from PerforMAX IQ (BPS) system / AC adapter
Communication Module Anybus CompactCom
Dimensions 202 L x 123 W x 55 H (mm), 7.95 x 4.84 x 2.16 (in)
Weight 0.77kg (1.7 lbs)
Max Operating Temp 43C (110F)
Housing Aluminum, Black epoxy powder coated


Questions? E-mail us  or call CC Steven at 805-658-0207.