HS Nozzle

Call for Price

Product Description

Shockless nozzle which operates on compressed air. Provides a broader air stream than the HE Nozzle.

HS Nozzle (dead-end)

HS Nozzle

HS Nozzles are “shockless” nozzles. The term shockless indicates that the ionizing point, located inside the nozzle tip, is capacitively coupled to the high voltage source, thus limiting the current at the point to a very low level. Under normal conditions, direct contact with the point will not result in a shock sensation. HS Nozzles can be installed individually, in series, and mounted on a standard air bar header.

UL, CSA, and FM approved.

FAQ     Applications     Dimensional Drawing(32kB)

 

Line Voltage Requirements 115 V, 50/60 Hz    230 V, 50/60 Hz
Size (Individual Nozzle) 2.5” high  by .87 i” wide by 3.5 ” long
Maximum Air Pressure (clean, dry air) 100 psi maximum
Air Flow (at 30 psi) 4.4 SCFM
Air Supply Connection 1/8 inch NPT on nozzle
Working Distance from substrate 3 inches to 10 inches
Operating Temperature Limit 150° F (66° C)
Static Charge Discharge Time 0.6 seconds at 6 inches at 30 psi (5000 V to 500V)

Design Your HS Nozzle

It’s easy to order HS nozzles to fit your requirements. First, decide if you want 10′, 20′, or 30′ cable on the end nozzle (the end nozzle is what you use for single nozzle applications, or it is the last nozzle of a series of nozzles on one cable). Next, decide how many, if any, “cable-thru” nozzles you want to attach to the end nozzle selected in Step 1 (cable-thru nozzles do not come with a high voltage cable, but easily slide over the end nozzle’s cable, giving you nozzles in a series.) Finally, decide if you want stopcocks (on/off valves to control airflow) on the individual nozzles.

Then  E-mail us or call C.C. Steven at 805-658-0207 and we’ll get them to you!

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.
You must order a power supply to power the nozzles if you do not already have one. We recommend the following models for the HS Nozzle.

 

Power Supply Part Number
F167 – 120V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0300
F167S – 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S0
F267 – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output IPF0301
F267S – 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch IPF03S1
N167 – 120V, 60Hz, 7 kV, 3mA max, 4 output IPN0519
N267 – 230V, 60Hz, 7 kV, 3mA max, 4 output IPN0515
N257 – 230V, 50Hz, 7 kV, 3mA max, 4 output IPN0516
Category: