|
|
Specification:
|
Shockless or Hot
|
Hot
|
|
Ionization Output
|
Very High
|
|
Maximum speed of target material
|
1500 ft/min
|
|
How far from charged material can bar be mounted?
|
1 inch
|
|
Approved for hazardous locations
|
No
|
|
Intended for heavy, normal or light industrial applications
|
Normal
|
|
Maximum overall length
|
143 inches
|
|
Design Your SS50 Static Bar
It's easy to configure and order a Simco SuperService static bar to fit your requirements. The SS50 bars are
available in 1/2” increments starting with overall lengths of 2” with a single ionizing emitter pin up to 143”
with 141” of ionizing emitter pins. The SS75 bars are available in 1” increments starting with overall lengths of 2” with a single ionizing emitter pin up to 143” with 141” of ionizing emitter pins.
All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach
the cable to a SIMCO Power Supply. Standard high voltage cable length is 10-ft. Longer lengths can be made if required.
Simply select the overall length of the static bar you need and determine if additional cable length is required to reach the power supply mounting location. Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get your bar built!
You must order a power supply to power the static bar if you do not already have one. We recommend the following models for the SS50 Static Bar.
|
Power Supply
|
Part Number
|
|
H164, 120V, 60 Hz, 2 output
|
IPH0401
|
|
H254, 230V, 50 Hz, 2 output
|
IPH0404
|
|
N164, 120V, 60 Hz, 4-output, lighted power switch
|
IPN0510
|
|
N264, 230V, 60 Hz, 4-output, lighted power switch
|
IPN0512
|
|