|
 MEB Static Bar
The Newly Enhanced MEB static bar is a very efficient and
very versatile static eliminator used in a wide variety of applications. Enhancements include increased ion output for more effective performance and rugged stainless steel construction.
The MEB Static Control Bar is a favorite of machine builders because its small size allows it to easily fit in tight spaces.
UL, CSA, and FM approved.
FAQ Static Bar Comparison Chart Dimensional Drawing(51kB) Return to Static Bars
|
|
|
Specification:
|
Shockless or Hot
|
Shockless
|
|
Ionization Output
|
Standard
|
|
Maximum speed of target material
|
1200 ft/min
|
|
How far from charged material can bar be mounted?
|
1 inch
|
|
Approved for hazardous locations
|
No
|
|
Intended for heavy, normal or light industrial
applications
|
Normal
|
|
Maximum overall length
|
107 1/2 inches
|
|
Design Your MEB Static Bar
It's easy to configure and order a Simco MEB static bar to fit your requirements. They are available in in
3/4” increments starting with overall lengths from 2.5” with a single ionizing emitter pin up to 140.5” with
138” of ionizing emitter pins. All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach the cable to a SIMCO Power Supply. Standard high voltage cable
length is 10-ft. Longer lengths can be made if required. Corona-free shielded cable is also available for
EMI/RFI protection. We can also add a right angle cable exit to the bar to facilitate the cable run.
Simply select the overall length of the static bar you need, determine if additional cable length is required to reach the power supply mounting location, whether EMI/RFI protection is desirable, and
decide if the right angle cable exit is wanted. Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get on built for you!
You must order a power supply to power the static bar if you do not already have one. We recommend the following models for the MEB Static Bar.
|
Power Supply
|
Part Number
|
|
F167 - 120V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0300
|
|
F167S - 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S0
|
|
F267 - 230V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0301
|
|
F267S - 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S1
|
|
N167 - 120V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0519
|
|
N267 - 230V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0515
|
|
N257 - 230V, 50Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0516
|
|
D167Q - 120V, 60 Hz, 7 kV, 3mA max, 2 output, use with Corona-free Shielded Cable
|
IPD0200
|
|
