8001iP8001iP Static Bar

The 8001iP static neutralizing bar is made of an extruded rigid PVC and reinforced epoxy resin in the center trough of the bar for extra rigidity.  There is no high voltage cable in the 8001iP neutralizing bar.  Both end blocks are designed to accept Universal Virtual AC high voltage connectors.  One end block has connector pins, while the other has connector sockets covered with socket caps. This design gives the user several options for connecting the neutralizing bar.


CE approved.

Specification:

Shockless or Hot

Shockless

Housing Material

Rigid PVC

Emitter Pin Material

Tungsten

Emitter Pin Spacing

1 inch

Cable

Quick disconnect extension cables, up to 15-ft

High Voltage Connector

Universal Virtual AC Connector (male and female)

Approved for hazardous locations

No

Maximum overall length

119 inches


Design Your 8001iP Static Bar

It's easy to configure and order a Simco 8001iP static bar to fit your requirements. They are available in 2” increments starting with overall lengths from  6.25” up to 122.25”.  All 8001iP static bars are shipped with mounting brackets.  High voltage cable and Power Supplies are sold separately.

Simply select the overall length of the static bar you need and determine what cable length is required to reach the power supply mounting location.    Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get on built for you!

You must order a power supply to power the static bar if you do not already have one. We recommend the following models for the 8001iP Static Bar.

Power Supply

Part Number

8100 Power Module

91-8100P

8015 Power Supply

91-8015

ph:  805-658-0207           fax:  805-658-2789           static@ccsteven.com

C.C.Steven  & Associates, 1363 Donlon Street Ventura, CA  93003     since 1978   

Static Control Bars for Industrial, Medical, Printing and Converting Industries

Visit our other sites to further enhance your manufacturing operations.  Click on a button below:

Static_Control_NBanner