R23ATREltex R23ATR Charging Appicator

The point charging bar R23ATR is used wherever target-specific electrostatic charges need to be applied even at high temperatures.  For instance in edge trim adhesion in flat film production.  Using the point charging bars R23ATR, both outer edge zones of the film are fixed directly downstream from the flat film extrusion die to prevent neck-in.

The point charging bar R23ATR can be operated with one, two or three emission tips.  The tips are interchangeable.  The geometry of the tips is adjustable depending on application.  This means that the point charging bar R23ATR may be used horizontally or vertically even in confined spaces.

Specification:

Electrode Element

PU, UL94 V0

Emission Tips

Maximum 3 tips, exchangeable, current limited

Ambient Operating Temperature

0 to +120C (+32 to +248F) at tip
0 to +70C (+32 to +158F) on body

Operating Voltage

30kVDC max

High Voltage Cable

Exchangeable HV Cable in plastic tubing with connector for charger and high voltage generator.  HV Cable ordered separately.

Static Generating Products for Industrial, Medical, Printing and Converting Industries

C.C.Steven  & Associates, 1363 Donlon Street Ventura, CA  93003     since 1978   

ph:  805-658-0207           fax:  805-658-2789           static@ccsteven.com

Visit our other sites to further enhance your manufacturing operations.  Click on a button below:

Static_Control_NBanner