N167, N267, and N257 Power Supplies

The N167 (120V), N267 (230V 60Hz) and N257 (230V 50Hz) are Simco's most versatile power supplies. They can be used with the ES2A4 Ionizing Air Gun and several shockless static bar models (ME100, MEB, MEJ, and PSH-N). A terminal block connector inside the power supply allows for the connection of up to four static eliminators to one power supply. The units accept either shielded or unshielded cable.  All feature lighted power switches.

These units have the added benefit of being FM approved for use in Class I, Division 1 and 2, Group D hazardous areas for electrostatic finishing applications involving spray painting, dipping, coating, and liquid printing. The power supplies must be installed outside of the hazardous area and be used to power an XP-20F Blower(s) located inside the hazardous location. The connecting high voltage cable must be run through rigid or flexible metal conduit sealed at each end.

All three are designed with short circuit protection (no fuse required!) which protects the power supply in the event of a short in the static eliminator or cable.

UL, CSA, CE and FM approved.
 FAQ         Dimensional Drawing(26kB)          Return to Power Supplies

Specification:   N167 N267 N257 Part Number IPN0519 IPN0515 IPN0516 Input Requirements 120V, 60 Hz 230V, 60Hz 230V, 50Hz Output Voltage 7 kV, 3mA max Number of outputs for static eliminators 4 Max Length of static bars which can be attached 300 inches Does the unit accept shielded cable Yes Acceptable for hazardous locations See description

Questions? Ready to order?  E-mail us or call C.C. Steven at 805-658-0207.