Static_Control_NBanner

Static Control Power Supplies for Industrial, Medical, Printing and Converting Industries

C.C.Steven & Associates, 1363 Donlon Street Ventura, CA 93003   since 1978  

ph:  805-658-0207          fax: 805-658-2789           static@ccsteven.com

[CCSteven.com] [Static Control] [Power Units] [D167QG Unit]

D167QG Static Eliminating Power Supply

D167QG Power Supply

THIS PRODUCT HAS BEEN DISCONTINUED.  PLEASE REFER TO THE D167Q  FOR ITS REPLACEMENT

The D167QG is designed specifically for use with the ES-2A4 Ionizing Air Gun. The power supply can energize one ES-2A4 with a 20' cable or two guns each with 10' of cable. The D167QG has a bracket which acts as a strain relief for the gun cable(s) and provides a convenient ground reference for the shielded cable on the ES2A4.

The D167QG is designed with short circuit protection (no fuse required!) which protects the power supply in the event of a short in the static eliminator or cable. The unit is compact in size and built to perform in rugged manufacturing environments.

UL, CSA and CE approved.
FAQ         Dimensional Drawing(29kB)         Return to Power Supplies

Specification:

 

D167QG

Part Number

IPD0201

Input Requirements

120V, 60 Hz

Output Voltage

7kV, 3mA max

Number of outputs for static eliminators

2

Max Length of static bars which can be attached

200 inches

Does the unit accept shielded cable

Yes

Acceptable for hazardous locations

No

Questions? Ready to order? E-mail us or call C.C. Steven at 805-658-0207.

Visit our other sites to further enhance your manufacturing operations.  Click on a button below: