Static_Control_NBanner

Static Control Nozzles for Industrial, Medical, Printing and Converting Industries

C.C.Steven  & Associates, 1363 Donlon Street Ventura, CA  93003     since 1978   

ph:  805-658-0207           fax:  805-658-2789           static@ccsteven.com
[CCSteven.com] [Static Control] [Ionizing Nozzles] [R55 Nozzle]

R55 Nozzle new

R55 Nozzle
The R55 Nozzle provides a powerful blast of ionized air used for cleaning and neutralizing surfaces in a variety of applications. It is particularly effective for separating paper and film sheets on feed piles. The R55 has eight active ionization pins to deliver outstanding depth and range of static elimination. The nozzle is shockless for operator safety.

The R55 comes in your choice of two air exit configurations, a slot or a double row of perforation holes (best for feed piles). It can be ordered with an axial (straight) or radial (right angle - preferred for feed piles) high voltage cable exit.

The cable for the R55 is metal shielded, which reduces EMI and RFI emissions and allows the cable to be mounted against metal without danger of burnout. The cable and power supply for the R55 must be ordered separately. 

FAQ     Applications     Dimensional Drawing(29kB)     Return to Nozzles

Specification:

Line Voltage Requirements

120V, 60 Hz:  230V, 50/60 Hz

Size (Individual Nozzle)

2 in x 1 in x 2 1/8 in (W x H x L)

Maximum Air Pressure (clean, dry air)

88 psi maximum

Air Flow (at 30 psi)

Slotted 2.45 SCFM, Perf 2.95 SCFM

Air Supply Connection

5/16 inch (8mm) nipple (hose barb)

Working Distance from substrate

up to 6 inches

Operating Temperature Limit

140F without air, 176F with air

Static Charge Discharge Time

.5 seconds at 6 inches at 30 psi (5000V to 500V)

Order Your R55 Nozzle and Accessories

Description

Part Number

R55-Perforated air exit and straight cable exit

I4081008

R55-Perforated air exit and right angle cable exit

I4081009

R55-Slotted air exit and straight cable exit

I4081010

R55-Slotted air exit and right angle cable exit

I4081011

2.5 meter (8.8') high voltage cable for R55

I4081012

5.0 meter (17.6') high voltage cable for R55

I4081013

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available. 
You must order a power supply to power the nozzles if you do not already have one. We recommend the following models for the R55 Nozzle.

Power Supply

Part Number

S165 - 120V, 50/60 Hz, 5 kV, 3mA max, 2 output, lighted power switch

IPS2000

S265 - 230V, 50/60 Hz, 5 kV, 3mA max, 2 output, lighted power switch

IPS2001
Questions? Ready to order?  E-mail us or call C.C. Steven at 805-658-0207.      

Visit our other sites to further enhance your manufacturing operations.  Click on a button below: