|
|
HS Nozzle
HS Nozzles are "shockless" nozzles. The term shockless indicates that the ionizing point, located inside the nozzle tip, is capacitively coupled
to the high voltage source, thus limiting the current at the point to a very low level. Under normal conditions, direct contact with the point will not result in a shock sensation. HS Nozzles can be installed
individually, in series, and mounted on a standard air bar header.
Ask about our NEW Modular Dust Catcher for source capturing the particulate you are using the HS
to blow off!
UL, CSA, and FM approved.
FAQ Applications Dimensional Drawing(32kB) Return to Nozzles
|
|
|
|
|
Line Voltage Requirements
|
115 V, 50/60 Hz 230 V, 50/60 Hz
|
|
Size (Individual Nozzle)
|
2 9/16 inches high by 13/16 inches wide by 2 1/2 inches long
|
|
Maximum Air Pressure (clean, dry air)
|
100 psi maximum
|
|
Air Flow (at 30 psi)
|
4.4 SCFM
|
|
Air Supply Connection
|
1/8 inch NPT on nozzle
|
|
Working Distance from substrate
|
3 inches to 10 inches
|
|
Operating Temperature Limit
|
150° F (66° C)
|
|
Static Charge Discharge Time
|
0.6 seconds at 6 inches at 30 psi (5000 V to 500V)
|
|
Design Your HS Nozzle
It's easy to order HS nozzles to fit your requirements. First, decide if you want 10', 20', or 30' cable on the end
nozzle (the end nozzle is what you use for single nozzle applications, or it is the last nozzle of a series of nozzles
on one cable). Next, decide how many, if any, "cable-thru" nozzles you want to attach to the end nozzle selected
in Step 1 (cable-thru nozzles do not come with a high voltage cable, but easily slide over the end nozzle's cable,
giving you nozzles in a series.) Finally, decide if you want stopcocks (on/off valves to control airflow) on the individual nozzles.
Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get them to you!
Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have
available.
|
You must order a power supply to power the nozzles if you do not already have one. We recommend the following models for the HS Nozzle.
|
Power Supply
|
Part Number
|
|
F167 - 120V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0300
|
|
F167S - 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S0
|
|
F267 - 230V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0301
|
|
F267S - 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S1
|
|
N167 - 120V, 60Hz, 7 kV, 3mA max, 4 output
|
IPN0519
|
|
N267 - 230V, 60Hz, 7 kV, 3mA max, 4 output
|
IPN0515
|
|
N257 - 230V, 50Hz, 7 kV, 3mA max, 4 output
|
IPN0516
|
|
