|
|
 XP-20F
The XP-20F Blower is approved for use in Class I, Division 1 and 2,
Group D hazardous areas. This is the only blower available on the market with UL approval for use in hazardous areas.
The XP-20F can be powered by either the XP167 or by the N167 Power Supply. The XP Power Supply is approved for mounting
within Class I, Division 1 and 2, Group D hazardous areas. The N167 Power Supply, which must be mounted outside the hazardous area, is approved for use in electrostatic finishing
processes involving spray painting, dipping, coating, and liquid printing processes. The high voltage cable
connecting the XP-20F Blower to either type of power supply must be run in rigid or flexible metal conduit. All
conduit runs are then sealed at the power supply enclosure. See the XP167 power supply dimensional drawing in the Power Supply section for conduit length allowances.
We recommend that you call C.C. Steven at 805-658-0207 if you are not already familiar with installing and operating this equipment.
UL approved for Class I, Division 1 and 2, Group D hazardous areas.
|
|
Features
- UL Listed for Class I, Division 1 and 2, Group D hazardous areas
- Designed for rugged industrial use
- Explosion proof motor
- Powerful air blast: 285 CFM
- Replaceable air intake filter
|
|
|
Blower Comparison Chart Dimensional Drawing(42kB) Return to Blowers
Specification:
|
Power Requirements
|
120V, 60 Hz, 1.3A
|
|
Size (W x H x D)
|
17 3/4 in. x 9 in. x 16 3/4 in.
|
|
Weight
|
24.7 lb.
|
|
Ion Balance
|
N/A
|
|
Area Volume Output
|
Fixed; 285 cfm
|
|
Effective Coverage
|
2’ x 10’ area
|
|
Discharge Time (5000V to 500V at 1' distance)
|
.9 seconds
|
|
Integrated Power Supply
|
No
|
|
Built-in Emitter Point Cleaner
|
No
|
|
Approved for Class I, Division 1, Group D Hazardous Locations
|
Yes
|
|
|
|
Order Your XP-20F and Accessories
|
|
|
Description
|
Part Number
|
|
XP-20F (order power supply separately)
|
IA20205
|
|
XP-20F Replacement Filter-pkg of 20
|
IA20210
|
|
You must order a power supply to power the XP-20F if you do not already have one.
We recommend the following models for the XP-20F.
|
Power Supply
|
Part Number
|
|
XP167 - 120V, 60 Hz, 7 kV, 3mA max, 4 output, use inside hazardous area
|
IPS0600
|
|
XP267 - 230V, 60 Hz, 7 kV, 3mA max, 4 output, use inside hazardous area
|
IPS0601
|
|
XPM167 - 120V, 60 Hz, 7 kV, 3mA max, 4 output, use outside hazardous area
|
IPXPM01
|
|
XPM267 - 230V, 60 Hz, 7 kV, 3mA max, 4 output, use outside hazardous area
|
IPXPM02
|
Questions? Ready to order? E-mail us or call C.C. Steven at 805-658-0207. |
